Went from my first controller to my second.

The F310 served me well for over 10 years. But now it’s time to retire has come.

My 2 week review after ROG sent me their Raikiri II Pro PC controller, everything in my review is my own oppinion although I recieved the controller for free. I won’t go over price points and value/money in my review as: A, I’m too lazy to lookup prices. B, prices on all peripherals from mouse-skates to controllers are always going to be region dependent anyways. C, I’m certainly too lazy to create a geo-location accurate pricing sheet for my review.

Comparing to my original Steam Controller (abbrev - SC), and my Xbox Elite S1 controller (abbrev - XC). I also have hyper-hidrosis so my experience with texture and rubber-quality will be from the perspective of someone who’s hands are wetter than a Karen who’s spotted an underpaid cashier.

tldr: My new main controller for Chiv 2, linux users will have to use a windows VM (or the usual black-magic if you’re a power-user-wizard, unlike me) for the best experience with the GearLink browser-software ASUS …

DISCLAIMER: This controller was sent to my by 8BitDo for free fore review. All the opinions are mine only. No one watched this video before its release.

So, we got Elite 3 before XBox Elite 3 (yes, I saw the leaks, but it is not out yet and we don’t know when it will be) and GTA VI… AND IT IS GREAT!

They finally fixed the shape and made it more comfortable. I like Ultimate 2, but could not use it for long playing sessions, because it hurts my hands.

Also, materials feel VERY PREMIUM. And hence the price - 150$ USD. Premium materials + Microsoft licensing = High price.

But again, it is an Elite version of this controller and XBox Elite 2 cost even more - 180$ USD (or even 200$ USD). But 3E beats it in every category, except for maybe 4 back buttons (but 3E has 2 on the top and 2 on the back, so 4 in total as well).

It genuinely feels like a new generation of 8BitDo controllers.

Whether you want/need one is completely up to you.

Flydigi have registered an ‘Apex 6 Pro’ controller with the Federal Communications Commission (FCC) in the US. This is separate from the ‘Apex 6’ (non-Pro) that was registered around four weeks earlier.

tl;dr:- The Pro version of the Apex 6 appears to use linear drive rumble motors in the palm grips, which could enable DualSense- or Switch-style haptics. However, the adaptive trigger mechanisms are removed compared to previous Apex models (just like the non-Pro Apex 6).

-–

Comparison of Apex 6 Pro to Apex 6 non-Pro

The Apex 6 Pro seems very similar to the regular Apex 6 (information in this post). That is also very similar to the Apex 5, so I’m not repeating all the details, just highlighting differences:

• Swapping eccentric rotating mass rumble motors for linear drive motors: allows for a wider range of rumble effects, although the pictures don’t indicate how rumble is implemented
• Removing the rumble motor window on the front shell: makes …

Materials and Process:

- The “horse” is constructed from wood, and built so it can be easily assembled/disassembled for transport. It’s basically a front and back plate, two diagonal steel ropes for stability, and then all the horizontal wood slats are slotted into the front/back frame with wooden plugs for easy removal. The saddle and saddle girth is essential for keeping the whole thing together and keeping the planks from falling out.

- The saddle has three pressure sensors made of Velostat for legs and seat, and there’s a load cell (like that of an electric kitchen scale) used to detect the reins being pulled.

- the sensors are hooked up to an Arduino clone using a custom-made Printed Circuit Board, and the input is processed through default libraries that came with the sensors and/or standard arduino code.

- the whole thing is then connected to a PC via USB and basically gets recognized as a keyboard (HUID), which then works to control the game. The …

Disclaimer: I’m not sponsored in any way. I just got really lucky with this opportunity. As usual all the opinions are mine only.

Hi all. I’ve been really wanting a new CT21 as a travel bag but I couldn’t decide between the Lite and the Plus. Ended up getting both and thought some others may enjoy the direct comparison in a few pics. I also haven’t really seen much of the orange 1000D Cordura online in irl pics, so I thought maybe others would like to see that as well.

I’ve decided to keep the CT21 Plus, the extra compartment makes sense for how much I travel, but overall I’m so impressed with this brand and both of these products.

Will be selling the Lite (CT21L-1000D-OR) on Marketplace rather than shipping back to Vietnam from the US, so if anyone’s interested feel free to DM me, I have several vetted sales of watches on here too and I am real lol. $120 including shipping to you in US, the bag has legit never left my place. [SOLD]

In any case, primarily posting for people to see the size comparison and the orange. Have a good day

I’ve been using my Max EDC every day for over 3 months now and wanted to share how it looked after walking 20 blocks in hard pouring rain. Obviously this bag does NOT have PU coated zippers - a main factor for why I originally chose this bag, along with X-PAC material.

While you can see how much water seeped into the internal lining in the images (darker tan compared to the lighter-colored, dry tan), my items getting wet in the rain really was not a concern with this bag. I even had my 13” MacBook Air in the laptop compartment and my laptop was completely DRY!

¹⁰⁄₁₀ would walk in the rain again, no concerns.

This policy is soul-crushing.

All of my current backpacks are leather— Filson Journeyman, Ferragamo, RRL, and similar. Security did tell me that sheer mesh is acceptable. Please, r/MannyBaggers, help me find a backpack.

Spent a weekend in NYC last weekend and ran the whole thing out of my 20L backpack. Everything in the flat lay fit into the bag with room to spare. Two compression cubes did most of the work.

Clothing (all rolled into two compression cubes):

• 1 pair dark jeans, worn on travel days

• 1 pair of khakis for shows and dinner

• 4 tees in a rotation of neutrals and blues

• 1 light long sleeve for layering

• 3 pairs of socks plus the pair on foot

• 4 underwear

• Leather belt

• Pair of white sneakers packed in the shoe bag

Tech and misc:

• MacBook

• Phone

• Rolled cable and charger kit in the small black roll

• Blue toiletry pouch

• Hydro Flask

The compression cubes made 20L feel roomier. I rolled everything, packed both cubes, then cinched them down. They flattened enough that the shoe bag and toiletry pouch dropped right in on top. What I’d cut next time: honestly, one of the tees. Four tees for a two-day trip were one more than I needed. I could have run three and …

Just stumbled across this pic from my travel 4 years ago and thought you guys might enjoy it. This was 6 months of south-east Asia, clothes are in the black thing at the bottom. Backpack is a Osprey Farpoint 40L.

Thought I’d share my packing list. Heading to Thailand for about a month. Will be working remotely for a couple weeks, and then holidaying the rest of the time.

Tried to keep weight under 7kg. I may ditch the sandals as I prefer to just wear trainers (I’ll be bringing my Nike Pegasus Trail or New Balance 574, but can’t decide)

Bags

- Osprey 26 + 6 Daylite Backpack
- Amazon packing cubes (2x)
- Peak Design light packing cuber (for electronics)
- Bellroy lite sling mini
- Matador laptop case

Clothes

- Uniqlo Dry Ex T-shirts (3x)
- Uniqlo Dry Ex Polo Shirt (1x)
- Chino/Cargo style shorts (1x)
- Swimming/sport shorts (1x)
- Trainer socks (5x)
- Uniqlo Airsim Briefs (4x)
- Sunglasses
- Teva Hurricane Sandals

Toiletries

- Travel toothpaste
- Travel Mouthwash
- Floss
- Philips travel toothbrush
- Suncream
- Contact Lenses
- Mitchum Roll On Deodorant
- Travel Moisturiser
- Face Cloth
- Face Wipes
- Tissues
- Hair Pomade
- Vapo Rub (in case I’m next to anyone smelly on the plane)
- Nail …

Here’s a bit of background and context since it’s my first post here: 
My wife and I have been traveling 2-3 times a year for the past 20 years. In our early 20s, we traveled with large hiking backpacks for long periods, and later transitioned to typical rolling carry-ons. We (mostly me) are very impatient in airports and hate waiting for luggages.

We had our daughter 7 years ago and continued traveling. For the first few years, we couldn’t travel light due to portable strollers and baby gear, but we managed to go back to carry-on-only when she turned 5. Last year, I stumbled upon this community and decided to be more mindful about onebagging. My main goal was to become a one-man baggage operator and not wait for luggage at the airport. I wanted to wear my backpack while rolling two carry-ons (one for my wife, one for my daughter) in each hand.

After a successful 4-day getaway test a few months ago, I just returned from a 3-week family holiday in Brazil (in and around Rio de …

My “ultralight” bag that I had for 11 days of El Camino from León to Santiago. Total base weight: 3,475g or 7.66lbs. Plus 11 more days in Portugal, Amsterdam, Switzerland and Austria

Here’s the link to see the items and how much they weigh (not an ad): https://lighterpack.com/r/ubq8p7

This is my first time one-bagging. I was able to fit all my belongings into this Aer Travel Pack 4 (28L) for a 15 day trip. I just got the backpack so I’m excited, I ended up also getting the hip belt attachment which I hope will help with the weight

Second picture is all I’m bringing to keep my things charged.

And 1 macbook.

Can’t wait to come back and see what worked and what didn’t.

This is what I packed:

1x large packing cube (Aer)

• 6 Small tshirts
• 1 gym shirt
• 2 shorts (linen)
• 1 gym short/beach

1x Small packing cube (aer)

• 7 boxers
• 6 pairs of socks
• 1 white tshirt

Peak Design toiletry bag (small)

Everything fits neatly in the main compartment and even had room to fit a small packable backpack (quechua) and a tote bag for laundry

In the plane I’m wearing:

- Chino pants from Uniqlo
- Basic tee in white from Zara
- PeakPerformance lightweight jacket (forgot the model but it weights nothing and it’s waterproof)
- 1 Hat
- Pair of Vans Ultrarange (only shoes I’m bringing)

This is my brand new CPL 16 with some custom blue. Very happy with it, zippers are so smooth.

I was previously running the Kludde MPL22, it is a great backpack but for EDC it is a little too big.

The CPL 16 fits perfectly my needs.

From the email:

In the early days of EVERGOODS, two vivid colors appeared in our lineup for a brief period. Inspired by technical mountain gear, these high-visibility hues were designed to stand out when visibility is a matter of life or death.

We named them: Signal Blue and Ultra Red.

Both were produced in extremely limited runs, sold out, and haven’t returned since.

That changes tomorrow at 8am MDT.

For the first time in 5+ years, Signal Blue and Ultra Red are back, fully stocked across all three CIVIC Access Pouches: 0.5L, 1L, and 2L.

Unlike the initial run, the quantities are not limited. For years, you’ve asked for these colors through customer surveys, waitlists, emails, and social comments. Tomorrow’s release is built to finally meet that pent up demand.

We’re also restocking many of our bestselling pouch colors, including several that have been unavailable for months.

I love the overall design of the MPL22, but I keep thinking a 26–28L version could be the sweet spot.

My ideal version would basically keep what makes the MPL22 great but add:

• Around 28L of capacity
• A larger yoke/top pocket
• The same two front exterior pockets, maybe with a little more organization
• No bulky dedicated laptop compartment
• Keep the lightweight, comfortable MPL harness and outdoorsy feel

Basically, I wouldn’t want it turned into another CTB. I’d want a bigger MPL22 that could handle day hikes, EDC, family/day-trip duty, and even some light travel while staying relatively simple and lightweight.

I feel like there’s a pretty big gap between the MPL22 and EVERGOODS’ more structured travel/EDC bags that something like this could fill.

Would anyone else be interested in an MPL28? And if EVERGOODS made one, what would you want them to add or change?

Apart from the cheap generic strap keepers I can get on Amazon, does anyone have any recommendations for some premium/fitted strap keepers to put on my CBT26?

Could’ve sworn I saw this posted here. Can anyone fact check me? Does a MTN fit in a CAP 1L?